How To Make A Parrot Cage How To Make A Parrot Cage

How to make a parrot cage?

Correct Cell Parameters

Before proceeding with the construction of the bird house, determine its future size and shape, as well as the material that you plan to use. The more spacious you make the cage, the better. Try to keep the length greater than the height and width. The minimum size of the cage for a parrot should give the bird the opportunity to fully open its wings without touching the rods. It is very sad to watch a beautiful and proud bird sitting crouched in a lump and constantly wraps its tail around it.

Of course, a budgie or even a couple of them will suit a 55cm / 52cm / 85cm dwelling, but for larger breeds such sizes are not acceptable. A comfortable cage for the Corella parrot is like an aviary with dimensions 130cm / 42cm / 100cm, in which the bird can spread its wings, freely climb and flit through the poles. You also need to take into account the total area of ​​the apartment, if the aviary will occupy most of it, think about whether you have chosen the breed of birds.

List of materials and tools

Cell manufacturing technology is very simple, but requires patience. An approximate list of standardized materials used in the construction of a cage for medium-sized parrots 55cm / 52cm / 85cm:

  • UD27 metal profile – 30 m;
  • welded galvanized wire mesh – 25x25x1.5mm – 2.5m2;
  • hardware – 4.2×7 – 220 pcs, 4.2×45 – 13 pcs, 3.5×35 – 13 pcs, 3×12 – 16 pcs, M6 bolt – 2 pcs, M6 nut 2 pcs, washers – 6 pcs;
  • canopies – 2 pcs;
  • chipboard plate – 800×600 mm;
  • galvanized sheet – 600×600 mm;
  • aluminum corner – 300 mm;

Manufacturing instruction

You have free time and you decided to start manufacturing, let’s take a step-by-step look at how to make a cage for a parrot:

  • First of all, you need to create a framework from the blanks of the metal profile, on which the grid will be attached.
  • To fix the upper and lower workpieces, cut off the side workpieces of the sides and bend the longitudinal part 90 degrees.
  • Using screws, connect the workpieces.
  • Measure the required number of grids on the frame, determining the areas of the wires.
  • Make holes in the marked areas, having previously disassembled the frame. The diameters of the wire and the holes must match.
  • Assemble the frame using the grid. To do this, drag the wire into the holes made.
  • Fasten the net by bending the wires sticking out. You need to make five of these frames – the front wall, lower wall, top, bottom and two sides.
  • Make a frame from the frames, combining them with the corners using a self-tapping screw.
  • From the chipboard, cut out the base of the cell of the required size. For fastening use corners and self-tapping screws.
  • If you make a pallet from a galvanized sheet, it will be much easier to maintain cleanliness. To do this, fasten the galvanized steel frame.
  • Cut the front part of the grid and grind off the sharp ends with a file – this is the place for the door.
Read more:  How To Make Cages For Songbirds

Essential Accessories

The cage is ready! Our tips on how to equip a parrot cage will help you create a cozy atmosphere for a feathered host. In the new home, be sure to place:

  • feeders – at least two;
  • drinking bowls are better automatic;
  • poles – wooden, made of strong wood;
  • toys and ladders made of wood.

Now you know everything about how to make a parrot cage. We hope that our recommendations will help you create an excellent home for your beloved pet. Remember that in any case, it is important that he is comfortable and comfortable there, since housing for birds is as important as for humans. Good luck in making the cage!

DIY Parrot Cage

Before you get a budgie, you need to equip a home for him. It is best to make a cage out of metal, and it is desirable that it be covered with any protective layer: galvanized, nickel-plated or chrome-plated. In no case do you make a cage out of copper, as over time copper will oxidize, and copper oxide is a strong poison for your parrot, which can cause serious illnesses. A wooden cage for parrots is also not very adapted for keeping birds in it, as they will begin to gnaw at the tree and the cage will quickly become worthless. And to look after a parrot in such a cage is more difficult.

How to make a homemade cage for parrots?

Let’s look at how to make and assemble a cage for a parrot with your own hands. For this we need the following materials:

  • metal wire 2.0 mm thick and auxiliary 0.9 mm, about 10 m of wire should go to a 19 cm high cell;
  • plywood 0.4 cm thick;
  • drill;
  • jigsaw;
  • thin-nose pliers.
  1. The work on arranging a cage for a budgie begins with creating a drawing in two projections. The size of the cage for parrots can be arbitrary. In addition, we draw a sketch of the decorative insert in sizes that match the dimensions of the cage.
  2. Two rings need to be bent from the wire, firmly fastening their edges – this is the top and bottom of the insert.
  3. We bend the pattern elements from the same wire, which we then bend around the circumference, and we fasten all the elements together.
  4. We make a small wire circle and attach knitting needles to it – this will be the dome of the cage.
  5. Now it’s the turn to make the base of the cell. On plywood, draw a circle with a radius equal to the radius of the wire rings. Having retreated by 5 mm, we outline the borders of the bottom of the cell and saw it out with a jigsaw. On a small circle, you need to outline the places for the holes for the knitting needles and drill them.
  6. We connect the base of the cell to the dome. We cut the required number of knitting needles from the wire and, bending them at one end with a hook, we attach to the decorative insert. The other end of the knitting needle is inserted into the plywood bottom, we bite off the excess part from the back with pliers and bend it. We do not insert two knitting needles – this will be the place for the door.
  7. We make a concave door. We cut off the wire blank, make a loop at one end of it, and bend the rest of it in a circle. We got a curl. Let’s make the same, but the mirror part.
  8. The loops are fastened together with a knitting needle.
  9. In the blank of the door, add the missing knitting needles, and we bend its base according to the size of the doorway.
  10. From the bottom of the doorway, add two more knitting needles, which we thread into the plywood base and bend from the bottom. We attach the door, and our cage is ready.
Read more:  Macaw Parrot Cage And Other Accessories

Now you have to choose the equipment for the cage with a budgie: a feeder and a drinking bowl, perches and toys. And finally, it’s time to populate a feathered friend in his new do-it-yourself cage.

How to make a parrot cage? – guide

How to make a parrot cage?

Correct Cell Parameters

Before proceeding with the construction of the bird house, determine its future size and shape, as well as the material that you plan to use. The more spacious you make the cage, the better. Try to keep the length greater than the height and width. The minimum size of the cage for a parrot should give the bird the opportunity to fully open its wings without touching the rods. It is very sad to watch a beautiful and proud bird sitting crouched in a lump and constantly wraps its tail around it.

Of course, a budgie or even a couple of them will suit a 55cm / 52cm / 85cm dwelling, but for larger breeds such sizes are not acceptable. A comfortable cage for the Corella parrot is like an aviary with dimensions 130cm / 42cm / 100cm, in which the bird can spread its wings, freely climb and flit through the poles. You also need to take into account the total area of ​​the apartment, if the aviary will occupy most of it, think about whether you have chosen the breed of birds.

List of materials and tools

Cell manufacturing technology is very simple, but requires patience. An approximate list of standardized materials used in the construction of a cage for medium-sized parrots 55cm / 52cm / 85cm:

  • UD27 metal profile – 30 m;
  • welded galvanized wire mesh – 25x25x1.5mm – 2.5m2;
  • hardware – 4.2×7 – 220 pcs, 4.2×45 – 13 pcs, 3.5×35 – 13 pcs, 3×12 – 16 pcs, M6 bolt – 2 pcs. M6 nut 2 pcs. washers – 6 pcs;
  • canopies – 2 pcs;
  • chipboard plate – 800×600 mm;
  • galvanized sheet – 600×600 mm;
  • aluminum corner – 300 mm;
How to make a parrot cage How to make a parrot cage

Manufacturing instruction

You have free time and you decided to start manufacturing, let’s take a step-by-step look at how to make a cage for a parrot:

  • First of all, you need to create a framework from the blanks of the metal profile, on which the grid will be attached.
  • To fix the upper and lower workpieces, cut off the side workpieces of the sides and bend the longitudinal part 90 degrees.
  • Using screws, connect the workpieces.
  • Measure the required number of grids on the frame, determining the areas of the wires.
  • Make holes in the marked areas, having previously disassembled the frame. The diameters of the wire and the holes must match.
  • Assemble the frame using the grid. To do this, drag the wire into the holes made.
  • Fasten the net by bending the wires sticking out. You need to make five of these frames – the front wall, lower wall, top, bottom and two sides.
  • Make a frame from the frames, combining them with the corners using a self-tapping screw.
  • From the chipboard, cut out the base of the cell of the required size. For fastening use corners and self-tapping screws.
  • If you make a pallet from a galvanized sheet, it will be much easier to maintain cleanliness. To do this, fasten the galvanized steel frame.
  • Cut the front part of the grid and grind off the sharp ends with a file – this is the place for the door.
Read more:  Cage For Corella - Dimensions And What Should Be In It

Essential Accessories

The cage is ready! Our tips on how to equip a parrot cage will help you create a cozy atmosphere for a feathered host. In the new home, be sure to place:

  • feeders – at least two;
  • drinking bowls are better automatic;
  • poles – wooden, made of strong wood;
  • toys and ladders made of wood.

Now you know everything about how to make a parrot cage. We hope that our recommendations will help you create an excellent home for your beloved pet. Remember that in any case, it is important that he is comfortable and comfortable there, since housing for birds is as important as for humans. Good luck in making the cage!

Pin It on Pinterest

Share This