In this article, a homemade craftsman will tell us how to saddle a cage for birds and small pets. To make the cage, the master uses the following
Tools and materials:
-Fine-mesh metal mesh;
-Scissors for metal;
Step One: The Framework
The cage frame is made of an aluminum corner. The master collects the upper and lower frames of the cell. First you need to cut the corner according to your cell size. Then drill in the corners and fix with rivets.
Step Two: Assembly
It’s easy to assemble the case, it’s enough to fasten the vertical posts between the upper and lower frames.
Step Three: Doorway
Marks a place for a door and installs racks.
Step Four: The Door
Gathers the door.
Marks up and installs the hinges on the rack. Hangs the door on the hinges.
Step Five: Bottom
The bottom of the cage is made of aluminum foil. The master cuts the foil in size and glues with superglue.
Step Six: Install the Grid
Cuts grids to the size of the walls and doors. Temporarily fixes them on superglue.
Then, from the inside sets the corners. Corners will fix the edges of the grids.
Seventh step: pen
The last step the master installs the handle on the door.